PS 865 - Beam Clamp

ps-865-no-dimensions.png
Can be used with PS 871 Safety Anchor Strap
 
Part No. Rod Size B C D E Finish Product Weight / Piece (lbs)
PS 865 1/2"-13 1/2"-13 1/4" (6) 1/2 x 2 1-11/16" (43) 15/16" (24) EG 2.01
PS 865 3/8"-16 3/8"-16 3/16" (5) 1/2 x 2 1-11/16" (43) 29/32" (23) EG 1.56
PS 865 5/8"-11 5/8"-11 5/16" (8) 5/8 x 2 1-11/16" (43) 1-5/16" (33) EG 3.11

    Design Loads

    Design Loads - PS 865
    Part Number  Design Load
    lbs (kN)
    PS 865 3/8" 1,100
    PS 865 1/2" 1,600
    PS 865 5/8" 2,400

    Notes:

    1. Design loads only apply to Power-Strut brand products.
    2. Safety factor = 2.5 based on ultimate strength of connection.
    3. For beam flanges between 3/4" (19.1 mm) to 1-5/8" (41.3 mm) thick.
    4. Set Screw Installation Torque:

    PS 865 3/8", PS 865 1/2":  125 in-lbs (14 N-m)
    PS 865 5/8":  250 in-lbs (28 N-m)

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes:

    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1 or SC3