PS 838 R & L - 12" to 22" Bracket

ps-838-no-dimensions.png
Stock Thickness:  0.105"

Options:  Right Hand (R) is shown in the images. Left Hand (L) is available.

Uniform Load Rating:  275 lbs when mounted on 12 ga. channel.
 
Part No. A B Finish Product Weight / Piece (lbs)
PS 838 06" L 6" (152.4) 1-15/16" (49.2) EG 0.6
PS 838 06" R 6" (152.4) 1-15/16" (49.2) EG 0.6
PS 838 08" L 8" (203.2) 2-7/16" (61.9) EG 0.8
PS 838 08" R 8" (203.2) 2-7/16" (61.9) EG 0.8
PS 838 10" L 10" (254.0) 2-15/16" (74.6) EG 1.2
PS 838 10" R 10" (254.0) 2-15/16" (74.6) EG 1.2
PS 838 12" L 12" (305) 3-7/16" (87) EG 1.5
PS 838 12" R 12" (305) 3-7/16" (87) EG 1.5
PS 838 14" L 14" (356) 3-15/16" (100) EG 1.8
PS 838 14" R 14" (356) 3-15/16" (100) EG 1.8
PS 838 16" L 16" (406) 4-7/16" (113) EG 2.3
PS 838 16" R 16" (406) 4-7/16" (113) EG 2.3
PS 838 18" L 18" (457) 4-15/16" (125) EG 2.6
PS 838 18" R 18" (457) 4-15/16" (125) EG 2.6
PS 838 20" L 20" (508) 5-7/16" (138) EG 3.0
PS 838 20" R 20" (508) 5-7/16" (138) EG 3.0
PS 838 22" L 22" (559) 5-15/16" (151) EG 3.6
PS 838 22" R 22" (559) 5-15/16" (151) EG 3.6
PS 838 24" L 24" (610) 6-7/16" (164) EG 4.0
PS 838 24" R 24" (610) 6-7/16" (164) EG 4.0
PS 838 26" L 26" (660) 6-15/16" (176) EG 4.6
PS 838 26" R 26" (660) 6-15/16" (176) EG 4.6
PS 838 28" L 28" (711) 7-7/16" (189) EG 4.8
PS 838 28" R 28" (711) 7-7/16" (189) EG 4.8
PS 838 30" L 30" (762) 7-15/16" (202) EG 5.5
PS 838 30" R 30" (762) 7-15/16" (202) EG 5.5

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes:

    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1 or SC3