PS 820 - 12" to 36" Heavy Duty Bracket (Slots Up and Down)

Part No. A Finish Product Weight / Piece (lbs)
PS 820-12 12" HG 6.1
PS 820-18 18" HG 7.8
PS 820-24 24" HG 9.5
PS 820-30 30" HG 11.2
PS 820-36 36" HG 12.9

    Design Loads

    Design Loads - PS 820
    Part Number Length "A" Uniform Design Load*
    lbs (kN)
    PS 820-12 12" 2,700  (12.00)
    PS 820-18 18" 1,800  (8.00)
    PS 820-24 24" 1,350  (6.00)
    PS 820-30 30" 1,080  (4.80)
    PS 820-36
    36" 900  (4.00)

    Notes:

    1. Design loads only apply to Power-Strut brand products.
    2. * Safety factor = 2.5 based on the ultimate strength of the connection when mounted to 12 gauge channel.

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes - Standard:

    • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
    • Power-Strut Defender (DF):  Conforms to ASTM A1059
    • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
    • Perma-Green (GR):  Conforms to commercial standards for powder coating
    • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1
    • Plain (PL):  No finish 

    Materials & Finishes - Special Metals:

    • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
    • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
    • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

    * These materials have different physical properties and performance characteristics. Please contact us for design support.