PS 732 - 8-1/2" Bracket

ps-732-no-dimensions.png
  • PS 732 - Image 1-01
  • PS 732 - Image 2-01
Part No. A B # of Holes Finish Product Weight / Piece (lbs)
PS 732 08" 8-1/2" 4" 2 EG 1.7
PS 732 10" 10-1/2" 4" 3 EG 2.0
PS 732 12" 12-1/2" 6" 4 EG 2.6
PS 732 14" 14-1/2" 6" 4 EG 2.9
PS 732 16" 16-1/2" 6" 4 EG 3.8
PS 732 18" 18-1/2" 6" 4 EG 4.2
PS 732 20" 20-1/2" 6" 4 EG 4.6

    Design Loads

    Design Loads- PS 732
    Part Number Length "A" Uniform Design Load*
    lbs (kN)
    PS 732 8" 8-1/2" 800
    PS 732 10" 10-1/2" 800
    PS 732 12" 12-1/2" 900
    PS 732 14"
    		 14-1/2" 900
    PS 732 16" 16-1/2" 1,200
    PS 732 18" 18-1/2" 1,200
    PS 732 20" 20-1/2" 1,000


    Notes:

    1. Design loads only apply to Power-Strut brand products.
    2. * When mounted to 12 Ga. Channel.
    3. Safety factor = 2.5 based on the ultimate strength of the connection.

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes:

    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1 or SC3