PS 651 - 6" to 24" Bracket (Slot Up)

ps-651-no-dimensions.png
Part No. A Finish Product Weight / Piece (lbs)
PS 651 06" 6" EG 1.9
PS 651 12" 12" EG 2.9
PS 651 18" 18" EG 4.0
PS 651 24" 24" EG 5.1

    Design Loads

    Design Loads - PS 651
    Part Number Length "A" Uniform Design Load*
    lbs (kN)
    PS 651 6" 6" 1,200  (5.34)
    PS 651 12" 12" 600  (2.67)
    PS 651 18" 18" 400  (1.78)
    PS 651 24"
    		 24" 300  (1.33)

    Notes:

    1. Design loads only apply to Power-Strut brand products.
    2. * When mounted to 12 Ga. Channel.
    3. Safety factor = 2.5 based on the ultimate strength of the connection.

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes:

    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1 or SC3