PS 619 - Square Washer

Part No. Rod Size Hole Diameter Finish Product Weight / Piece (lbs)
PS 619 1/2" 1/2" 9/16" EG 0.17
PS 619 1/2" 1/2" 9/16" DF 0.18
PS 619 1/2" 1/2" 9/16" HG 0.18
PS 619 1/2" 1/2" 9/16" GR 0.17
PS 619 1/2" 1/2" 9/16" ZD 0.17
PS 619 1/2" 1/2" 9/16" SS 0.17
PS 619 1/2" 1/2" 9/16" ST 0.17
PS 619 1/2" 1/2" 9/16" AL 0.06
PS 619 3/4" 3/4" 13/16" EG 0.15
PS 619 3/4" 7/8" 15/16" EG 0.14
PS 619 3/4" 7/8" 15/16" HG 0.17
PS 619 3/4" 3/4" 13/16" HG 0.159
PS 619 3/4" 3/4" 13/16" SS 0.15
PS 619 3/8" 3/8" 7/16" EG 0.18
PS 619 3/8" 3/8" 7/16" DF 0.191
PS 619 3/8" 3/8" 7/16" HG 0.191
PS 619 3/8" 3/8" 7/16" GR 0.18
PS 619 3/8" 3/8" 7/16" ZD 0.18
PS 619 3/8" 3/8" 7/16" SS 0.18
PS 619 3/8" 3/8" 7/16" ST 0.18
PS 619 3/8" 3/8" 7/16" AL 0.06
PS 619 5/16" 5/16" 11/32" EG 0.18
PS 619 5/16" 5/16" 11/32" HG 0.191
PS 619 5/16" 5/16" 11/32" GR 0.18
PS 619 5/16" 5/16" 11/32" ZD 0.18
PS 619 5/16" 5/16" 11/32" SS 0.18
PS 619 5/16" 5/16" 11/32" ST 0.18
PS 619 5/16" 5/16" 11/32" AL 0.06
PS 619 5/8" 5/8" 11/16" EG 0.16
PS 619 5/8" 5/8" 11/16" HG 0.17
PS 619 5/8" 5/8" 11/16" ZD 0.16
PS 619 5/8" 5/8" 11/16" SS 0.18
PS 619 5/8" 5/8" 11/16" ST 0.18

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes - Standard:

    • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
    • Power-Strut Defender (DF):  Conforms to ASTM A1059
    • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
    • Perma-Green (GR):  Conforms to commercial standards for powder coating
    • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1
    • Plain (PL):  No finish 

    Materials & Finishes - Special Metals:

    • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
    • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
    • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

    * These materials have different physical properties and performance characteristics. Please contact us for design support.