PS 2658 - Hinged Beam Clamp

Part No. Finish Product Weight / Piece (lbs)
PS 2658-06 EG 3.87
PS 2658-08 EG 3.97
PS 2658-10 EG 4.08
PS 2658-12 EG 4.2

    Design Loads

    Design Loads - PS 2658
    Part Number Beam Flange Width
    (in)
     Design Load
    (lbs)
    PS 2658-06 4"  - 6" 1,500
    PS 2658-08 6-1/2"  -  8" 1,500
    PS 2658-10 8-1/8"  -  10" 1,500
    PS 2658-12 10-1/8"  -  12" 1,500

    Notes:

    1. Design loads only apply to Power-Strut brand products.
    2. Use in pairs only.
    3. Safety factor = 2.5 based on ultimate strength of connection.
    4. For Slopes up to 18°.
    5. For use with beam flanges up to 7/8" thick, flange widths from 4" - 12".

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes:

    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1 or SC3