PS 2653 - Purlin Beam Clamp

ps-2653-no-dimensions.png
T1 Use With:  PS 200, PS 210, PS 300
T2 Use With:  PS 100, PS 150, PS 200 2T3
T3 Use With:  PS 100 2T3
 
Part No. Finish Product Weight / Piece (lbs)
PS 2653 T1 EG 1.75
PS 2653 T2 EG 1.79
PS 2653 T3 EG 1.8

    Design Loads

    Design Load:  1,200 lbs

    Notes:

    1. Design loads only apply to Power-Strut brand products.
    2. Use in pairs only.
    3. Safety factor = 2.5 based on ultimate strength of connection.

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes:

    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1 or SC3