PS 200 2T2 - 1-5/8" x 3-1/4", 12 Gage, Double Combination

ps-200-2t2-no-dimensions.png
Part No. Length (ft) Finish Product Weight / Ft (lbs/ft)
PS200-2T2 20 PG 3.78
PS200-2T2 10 PG 3.78
PS200-2T2 20 HG 4.028
PS200-2T2 10 HG 4.028
PS200-2T2 10 GR 3.78
PS200-2T2 20 GR 3.78
PS200-2T2 10 PL 3.78
PS200-2T2 20 PL 3.78

    Elements of Section

    Elements of Section - PS 200 2T2
    Area of Section 1.111 in2 (7.2 cm2)
    Axis 1-1 Axix 2-2
    Moment of Inertia (I) 1.204 in4 (50.1 cm4) 0.381 in4 (15.9 cm4)
    Section Modulus (S) 0.741 in3 (12.1 cm3) 0.469 in3 (7.7 cm3)
    Radius of Gyration (r) 1.041 in (2.6 cm) 0.586 in (1.5 cm)

    General Specifications

    Standard Lengths:

    • 10 feet:  10' or 10’ 1/8” (3.05m) ± 1/8" (3 mm)
    • 20 feet:  20' or 20’ 3/8” (6.11m) ± 1/8" (3 mm)

    Special Lengths:

    Curved Channel:

    • Many Power-Strut channel sections can be supplied with a curve. Click here for our ordering form, specifications, and instructions.

    Load Data:

     

    • All beam and column load data pertains to carbon steel and stainless steel channels.
    • Load tables apply only to Power-Strut brand channel.
    • Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
    • Loads are based on 33 ksi steel cold formed to 42 ksi.
    • Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
    • Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide.
    • For bearing loads, reference our bearing loads page.

    Welds:

    • Welded channels are spot welded 2" (51 mm) or 3" (76 mm) on-center. 

     

     

    Materials & Finishes

    Materials & Finishes - Standard:

    • Pregalvanized (PG):  Conforms to ASTM A653 SS GR 33, G90.
    • Power-Strut Defender (DF):  Conforms to ASTM A1046 SS GR 33
    • Hot Dip Galvanized (HG):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
    • Perma-Green (GR):  Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
    • Perma-Gold (ZD):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
    • Plain (PL):  Conforms to ASTM A1011 SS GR 33
    Materials & Finishes - Special Metals:
    • Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
    • Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
    • Aluminum (EA):  ASTM B221, Type 6063-T6 (Extruded) *

    * These materials have different physical properties and performance characteristics. Please contact us for design support.