PS 1000 - Conduit (EMT) Clamp

Part No. Conduit Size O.D. Size Ga. (Thickness) Finish Product Weight / Piece (lbs)
PS 1000 1" 1" (25) 1.163" (29.5) 14 (1.9) EG 0.15
PS 1000 1" 1" (25) 1.163" (29.5) 14 (1.9) DF 0.16
PS 1000 1" 1" (25) 1.163" (29.5) 14 (1.9) HG 0.16
PS 1000 1" 1" (25) 1.163" (29.5) 14 (1.9) SS 0.15
PS 1000 1" 1" (25) 1.163" (29.5) 14 (1.9) AL 0.05
PS 1000 1/2" 1/2" (13) 0.706" (17.9) 16 (1.5) EG 0.11
PS 1000 1/2" 1/2" (13) 0.706" (17.9) 16 (1.5) HG 0.22
PS 1000 1/2" 1/2" (13) 0.706" (17.9) 16 (1.5) SS 0.11
PS 1000 1/2" 1/2" (13) 0.706" (17.9) 16 (1.5) AL 0.037
PS 1000 1-1/2" 1-1/2" (38) 1.740" (44.2) 12 (2.7) EG 0.29
PS 1000 1-1/2" 1-1/2" (38) 1.740" (44.2) 12 (2.7) DF 0.29
PS 1000 1-1/2" 1-1/2" (38) 1.740" (44.2) 12 (2.7) ZD 0.29
PS 1000 1-1/2" 1-1/2" (38) 1.740" (44.2) 12 (2.7) SS 0.29
PS 1000 1-1/4" 1-1/4" (32) 1.510" (38.4) 14 (1.9) EG 0.18
PS 1000 1-1/4" 1-1/4" (32) 1.510" (38.4) 14 (1.9) DF 0.18
PS 1000 1-1/4" 1-1/4" (32) 1.510" (38.4) 14 (1.9) SS 0.18
PS 1000 1-1/4" 1-1/4" (32) 1.510" (38.4) 14 (1.9) AL 0.06
PS 1000 2" 2" (51) 2.197" (55.8) 12 (2.7) EG 0.33
PS 1000 2" 2" (51) 2.197" (55.8) 12 (2.7) DF 0.35
PS 1000 2" 2" (51) 2.197" (55.8) 12 (2.7) HG 0.35
PS 1000 2" 2" (51) 2.197" (55.8) 12 (2.7) SS 0.33
PS 1000 2" 2" (51) 2.197" (55.8) 12 (2.7) AL 0.11
PS 1000 3/4" 3/4" (19) 0.922" (23.4) 16 (1.5) EG 0.12
PS 1000 3/4" 3/4" (19) 0.922" (23.4) 16 (1.5) HG 0.13
PS 1000 3/4" 3/4" (19) 0.922" (23.4) 16 (1.5) SS 0.12
PS 1000 3/4" 3/4" (19) 0.922" (23.4) 16 (1.5) AL 0.04
PS 1000 3/8" 3/8" (10) 0.577" (14.7) 16 (1.5) EG 0.09
PS 1000 3/8" 3/8" (10) 0.577" (14.7) 16 (1.5) SS 0.09

    Design Loads

    PS 1000
    Part Number Conduit Size Design Load
    (lbs)
    PS 1000 1/2 1/2" 400
    PS 1000 3/4 3/4" 400
    PS 1000 1
    1" 600
    PS 1000 1-1/4
    1-1/4" 600
    PS 1000 1-1/2
    1-1/2" 800
    PS 1000 2 2" 800
    PS 1100 2-1/2 2-1/2" 800
    PS 1100 3 3" 800
    PS 1100 3-1/2 3-1/2" 1,000
    PS 1100 4 4" 1,000

    Notes:

    1. Design loads apply only to Power-Strut brand products. .
    2. Design loads are based on static testing in 12 ga. channel with a safety factor of 5.0.
    3. Reference the PS 1100 Series clamps for 2-1/2" thru 4" EMT sizes.


    General Specifications

    Installation:

    • Torque:
     

    Note: When tightening 1/4" screws used with a two piece pipe clamp, a torque of 5 ft-lbs (60 in-lbs) should be used.

    Materials & Finishes

    Material:

    • The steel meets or exceeds the physical properties of ASTM A1011 GR 33, except with SS, ST & AL finishes.
    Finishes:
    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
    • Power-Strut Defender (DF):  Conforms to ASTM A1059
    • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
    • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1
    • Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
    • Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
    • Aluminum (AL): TBD

    * These materials have different physical properties and performance characteristics. Please contact us for design support.

    Material & Finish Combinations:

    Material / Finish
    Part Number
    Suffix
    Pipe Clamp
    Material / Finish
    Fasteners (Screw & Nut)
    Material / Finish
    Example
    Electro-galvanized
    EG
    EG
    EG
    PS 1100 1/2 EG
    Hot-dipped galvanized
    HG
    HG
    SS
    PS 1100 1/2 HG
    Power-Strut Defender
    DF
    DF
    DF
    PS 1100 1/2 DF
    Stainless Steel Type 304
    SS
    SS
    SS
    PS 1100 1/2 SS
    Stainless Steel Type 316
    ST
    ST
    SS
    PS 1100 1/2 ST
    Aluminum
    AL
    AL
    AL
    PS 1100 1/2 AL